Virat Aluminium

Size Range - 5mm dia to 1000 mm dia

As per standards - EN573, EN755, ASTM B221 

Chemical Symbols - EN AW-Al Mg2,5

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

Length - 1 To 6 Meters, Random, Fix & Cut Length or as per clients’ requirement

Form - Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc

Surface - Mill Finish

5052 is the aluminium alloy most suited to forming operations, with good workability and higher strength than that of either 1100 or 3003. 5052 is not heat-treatable, but is stronger than most of the 5xxx series of aluminium. 

The 5052 Rods provide excellent resistance to serves acids and alkalis in the seawater and brackish water. The aluminium 5052 Rods offer excellent strength, tensile, mechanical property, ductility, hardness, and toughness, and so on. It has high resistance to corrosion and oxidation in the reducing and media atmosphere. It can show high harden-ability and toughness at a low temperature. It offers resistance to chloride stress and cracking corrosion in the chemical environments. It resists to a crevice, pitting corrosion and environmental corrosion as well.

The Aluminium 5052 Rods has good workability, ductility, good work performance, accurate surface dimensions, weldability, machinability, formability, fabric-ability, etc. The Aluminium 5052 Rods are commonly used in number of industries like chemical, paper and pulp, oil and gas, petrochemical, off shore, oil drilling, food process, etc. It is also used in gas process, constructions, automobile, condenser, boiler, pollution control machine, marine, seawater applications, and many more.

Applications

•  Aircraft Fuel Lines
•  Aircraft Oil Lines
•  Fuel Tanks
• Sheet Metal Work
• Appliances
• Lighting
• Wire
• Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate

Size Range - 5mm dia to 1000 mm dia

As per standards - EN573, EN755, ASTM B221 

Chemical Symbols - EN AW-Al Mg2,5

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

Length - 1 To 6 Meters, Random, Fix & Cut Length or as per clients’ requirement

Form - Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc

Surface - Mill Finish

5052 is the aluminium alloy most suited to forming operations, with good workability and higher strength than that of either 1100 or 3003. 5052 is not heat-treatable, but is stronger than most of the 5xxx series of aluminium. 

The 5052 Rods provide excellent resistance to serves acids and alkalis in the seawater and brackish water. The aluminium 5052 Rods offer excellent strength, tensile, mechanical property, ductility, hardness, and toughness, and so on. It has high resistance to corrosion and oxidation in the reducing and media atmosphere. It can show high harden-ability and toughness at a low temperature. It offers resistance to chloride stress and cracking corrosion in the chemical environments. It resists to a crevice, pitting corrosion and environmental corrosion as well.

The Aluminium 5052 Rods has good workability, ductility, good work performance, accurate surface dimensions, weldability, machinability, formability, fabric-ability, etc. The Aluminium 5052 Rods are commonly used in number of industries like chemical, paper and pulp, oil and gas, petrochemical, off shore, oil drilling, food process, etc. It is also used in gas process, constructions, automobile, condenser, boiler, pollution control machine, marine, seawater applications, and many more.

Applications

•  Aircraft Fuel Lines
•  Aircraft Oil Lines
•  Fuel Tanks
• Sheet Metal Work
• Appliances
• Lighting
• Wire
• Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 5mm dia to 1000 mm dia

As per standards - EN573, EN755, ASTM B221 

Chemical Symbols - EN AW-Al Mg2,5

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

Length - 1 To 6 Meters, Random, Fix & Cut Length or as per clients’ requirement

Form - Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc

Surface - Mill Finish

5052 is the aluminium alloy most suited to forming operations, with good workability and higher strength than that of either 1100 or 3003. 5052 is not heat-treatable, but is stronger than most of the 5xxx series of aluminium. 

The 5052 Rods provide excellent resistance to serves acids and alkalis in the seawater and brackish water. The aluminium 5052 Rods offer excellent strength, tensile, mechanical property, ductility, hardness, and toughness, and so on. It has high resistance to corrosion and oxidation in the reducing and media atmosphere. It can show high harden-ability and toughness at a low temperature. It offers resistance to chloride stress and cracking corrosion in the chemical environments. It resists to a crevice, pitting corrosion and environmental corrosion as well.

The Aluminium 5052 Rods has good workability, ductility, good work performance, accurate surface dimensions, weldability, machinability, formability, fabric-ability, etc. The Aluminium 5052 Rods are commonly used in number of industries like chemical, paper and pulp, oil and gas, petrochemical, off shore, oil drilling, food process, etc. It is also used in gas process, constructions, automobile, condenser, boiler, pollution control machine, marine, seawater applications, and many more.

Applications

•  Aircraft Fuel Lines
•  Aircraft Oil Lines
•  Fuel Tanks
• Sheet Metal Work
• Appliances
• Lighting
• Wire
• Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 5mm dia to 1000 mm dia

As per standards - EN573, EN755, ASTM B221 

Chemical Symbols - EN AW-Al Mg2,5

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

Length - 1 To 6 Meters, Random, Fix & Cut Length or as per clients’ requirement

Form - Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc

Surface - Mill Finish

5052 is the aluminium alloy most suited to forming operations, with good workability and higher strength than that of either 1100 or 3003. 5052 is not heat-treatable, but is stronger than most of the 5xxx series of aluminium. 

The 5052 Rods provide excellent resistance to serves acids and alkalis in the seawater and brackish water. The aluminium 5052 Rods offer excellent strength, tensile, mechanical property, ductility, hardness, and toughness, and so on. It has high resistance to corrosion and oxidation in the reducing and media atmosphere. It can show high harden-ability and toughness at a low temperature. It offers resistance to chloride stress and cracking corrosion in the chemical environments. It resists to a crevice, pitting corrosion and environmental corrosion as well.

The Aluminium 5052 Rods has good workability, ductility, good work performance, accurate surface dimensions, weldability, machinability, formability, fabric-ability, etc. The Aluminium 5052 Rods are commonly used in number of industries like chemical, paper and pulp, oil and gas, petrochemical, off shore, oil drilling, food process, etc. It is also used in gas process, constructions, automobile, condenser, boiler, pollution control machine, marine, seawater applications, and many more.

Applications

•  Aircraft Fuel Lines
•  Aircraft Oil Lines
•  Fuel Tanks
• Sheet Metal Work
• Appliances
• Lighting
• Wire
• Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 0.4mm to 800mm thickness

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

As per standards - EN573, EN485, ASTM B221

Chemical Symbols - EN AW-Al Mg2,5

Length - Standard & Cut Length or as per clients’ requirement

Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.

Part of the 5xxx series of aluminium. Grades in this family are alloyed using magnesium (2.5%) and possess moderate-to-high strength characteristics. These grades are considered to have good weldability and resistance to corrosion. 5052 aluminium also includes .25% chromium.

Properties

Alloy 5052-H32 has a range of useful properties:

Decorative Finish

Hard Wearing

Non-Slip

Corrosion Resistant

Low Maintenance

Anti-Static

Light-weight

Applications

Amongst the applications for Alloy 5052 are:

Tread-plate

Boiler-making

Containers

Nameplates

Road Signs

Architectural Paneling

Welded Tubes

Chemical Industry

Irrigation

Desalination units

Pressure Vessels

Rivets

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Plastic / Wooden Packing

Size Range - 5mm dia to 1000 mm dia

As per standards - EN573, EN755, ASTM B221 

Chemical Symbols - EN AW-Al Mg2,5

Temper - O, H12, H14, H16, H18, H22, H24, H26, H32, H112

Length - 1 To 6 Meters, Random, Fix & Cut Length or as per clients’ requirement

Form - Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc

Surface - Mill Finish

5052 is the aluminium alloy most suited to forming operations, with good workability and higher strength than that of either 1100 or 3003. 5052 is not heat-treatable, but is stronger than most of the 5xxx series of aluminium. 

The 5052 Rods provide excellent resistance to serves acids and alkalis in the seawater and brackish water. The aluminium 5052 Rods offer excellent strength, tensile, mechanical property, ductility, hardness, and toughness, and so on. It has high resistance to corrosion and oxidation in the reducing and media atmosphere. It can show high harden-ability and toughness at a low temperature. It offers resistance to chloride stress and cracking corrosion in the chemical environments. It resists to a crevice, pitting corrosion and environmental corrosion as well.

The Aluminium 5052 Rods has good workability, ductility, good work performance, accurate surface dimensions, weldability, machinability, formability, fabric-ability, etc. The Aluminium 5052 Rods are commonly used in number of industries like chemical, paper and pulp, oil and gas, petrochemical, off shore, oil drilling, food process, etc. It is also used in gas process, constructions, automobile, condenser, boiler, pollution control machine, marine, seawater applications, and many more.

Applications

•  Aircraft Fuel Lines
•  Aircraft Oil Lines
•  Fuel Tanks
• Sheet Metal Work
• Appliances
• Lighting
• Wire
• Rivets

Additional Information:

• Delivery Time: Immediate